New 260 SL PrecisionCut™ Walk Greens Mower

Specifications

Engine Type	Air-cooled, gas
Horsepower	At 3600 rpm: 2.4 3.2 hp Engine manufacturer net power, tested in accordance with SAE J1349. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information.
Cutting width	66 cm 26 in.
Frequency of clip standard	4.62 mm 0.182 in.
Reel diameter, in. (mm)	127 mm 5 in.
Number of blades	7 or 11 blade
Traction drum	Dual, aluminum
Forward speed	With transport wheels at 3000 engine rpm: 7.2 km/h 4.5 mph
Weight (less GTC's, gear drive and transport wheel, with catcher)	107.7 kg 237 lb
Operator ear	84 dBA

Type	Air-cooled, gas
Cycle	4-cycle
Bore and stroke	60x42 mm 2.36x1.65 in.
Piston displacement	122 cc 7.4 cu in.
Compression ratio	8:5:1
Horsepower	At 3600 rpm: 2.4 kW 3.2 hp Engine manufacturer net power, tested in accordance with SAE J1349. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information.
Direction of rotation of output shaft	Counterclockwise viewed from shaft side
Inclination limit	Tilted up to 20 degrees in any direction
Idle speed at output shaft	1700 (+/- 100) rpm
Maximum speed at output shaft	2950 (+/- 150) rpm

Type	Regular grade unleaded or leaded
Tank capacity	2.5 L 0.66 U.S. gal.

Type	SAE 30 or SAE 10W-30
Capacity	0.6 L 0.63 U.S. gal.
Differential drive capacity	0.14 L 0.3 U.S. gal.

Cutting width	66 cm 26 in.
Cutting height (minimum)	Standard - 3.0 mm bedknife Min. 3.2 mm 0.125 in. Max. 22 mm 0.875 in. standard Optional - 2.5 mm bedknife Min. 2.5 mm 0.11 in. Max. 22 mm 0.875 in. standard Optional - tee bedknife 4.8 mm 0.19 in.
Frequency of clip standard	4.62 mm 0.182 in.

Diameter, in. (mm)	127 mm 5 in.
Number of blades	7 or 11 blade
Material	Heat-treated chromium molydenum steel
Bedknife - standard

Brush	Interlocked with reel, rotation in reverse direction; nylon diameter: 60 mm 2.375 in.
Vertical cutter blades	Specially hardened carbon tool steel; star shaped; 88 blades diameter: 60 mm 2.375 in.
Adjustable brush or cutter height	Brush even with height-of-cut; GTC below height-of-cut maximum: 0.8 mm 0.0313 in.
Gear drive	Gear driven from reel shaft, opposite direction of reel, rotation powers brush or vertical cutter

Size	2.7 kg 6 lb
Type	Polyethylene

Transport	Belt tension
Reel jaw-type clutch	On/off
Brush/GTC jaw-type clutch	On/off
Traction drum	Dual, aluminum

Forward speed	With transport wheels at 3000 engine rpm: 7.2 km/h 4.5 mph
Roller (rear)	Aluminum, diameter: 190 mm 7.5 in.
Roller (front) (grooved or smooth)	Machined steel, diameter: 50 mm 2 in. for cutting height adjustment

Length (w/tires installed)	940 mm 37 in.
Width (w/tires installed)	105 cm 41.3 in.
Height (w/tires installed)	119 cm 47 in.
Weight (less GTC's, gear drive and transport wheel, with catcher)	107.7 kg 237 lb

Operator ear	84 dBA
Measuring standard	ISO 11201
Attachments installed	GTCs, reels engaged

Type	ANSI B71.4-2004