New 913 V-Ripper

Tillage
REQUEST A QUOTE
REQUEST A QUOTE
Key Features
  • Adjustable standard spacing prevents side movement
  • V-pattern frame promotes leading-edge shattering
  • LaserRip™ Extreme points
  • Heavy-duty steel ripper points

More Info

Features

Soil probe helps to determine proper operating depth
Soil probeSoil probe
#

The soil probe helps operators to determine the proper operating depth of their ripper points,
38 mm (1.5 in.) below the bottom of the compaction layer.

The probe allows obtaining the maximum amount of soil fracturing from the entire family of John Deere ripper points. Marked in 51-mm (2-in.) increments from 254 mm to 559 mm (10 in. to 22 in.), the probe provides accurate feedback of compaction layer depth.

 

It is stored on the mainframe of the ripper for convenient access. The operator's manual explains the proper use of the soil probe.

Strong V-pattern frame promotes leading-edge shattering of center shank and material flow
913 V-Ripper 913 V-Ripper
#

The frame design of the 913 V-Ripper positions the standards in a V pattern:

  • Promotes leading-edge shattering of the center shank and material flow through the machine

The 127-mm x 178-mm (5-in. x 7-in.) cross-section frame has 10-mm (3/8-in.) thick walls:

  • Provides strength to handle tractors of up to 150 power take-off (PTO) horsepower
  • Same frame-size tubing as non-expandable 915 V-Ripper
  • Parking stands are included in base equipment
Two-position integral hitch to meet operator requirements
Low and high positions on 3-point mastLow and high positions on 3-point mast
#

3-point hitch hookup is for Category 2 or 3N tractors.

 

The integral hitch can be set to two positions:

  • 1 = Low position
    Gives maximum transport clearance and allows ripping to approximately 508 mm (20 in.) deep with the 838-mm (33-in.) standards.
  • 2 = High position
    Enables ripping to a maximum depth of 584 mm (23 in.) deep with the 838-mm (33-in.) standards.

Specifications

Compare >>>

Select up to 2 models to compare specifications

John Deere913 V-Ripper
Add Model
Add Model
Tool configuration
Type V-ripper
Option 1 3-standard, 20-in. spacing
Option 2 3-standard, 25-in. spacing
Option 3 3-standard, 30-in. spacing
Option 4
Option 5
Option 6
Option 7
Option 8
Option 9
Option 10
Option 11
Option 12
Option 13
Option 14
Option 15
Option 16
Option 17
Option 18
Option 19
Option 20
Option 21
Option 22
Working width
Option 1 8, 4 ft, in.
Option 2 10, 5 ft, in.
Option 3 12, 6 ft, in.
Option 4
Option 5
Option 6
Option 7
Option 8
Option 9
Option 10
Option 11
Option 12
Option 13
Option 14
Option 15
Option 16
Option 17
Option 18
Option 19
Option 20
Option 21
Option 22
Transport width
Option 1 7 ft
Option 2 7 ft
Option 3 7 ft
Option 4
Option 5
Option 6
Option 7
Option 8
Option 9
Option 10
Option 11
Option 12
Option 13
Option 14
Option 15
Option 16
Option 17
Option 18
Option 19
Option 20
Option 21
Option 22
Operating depth
Maximum 23 in.
Frame
Size
Maximum underframe clearance
Depth control
Option 1 Intergral units are controlled by tractor, rockshaft, and gauge wheels
Option 2
Option 3
Hydraulic requirements
Option 1
Option 2
Hitch
Options Intergral
Three-point hitch requirements Cat 2 or 3N with Quick Coupler; Cat 3N without Quick-Coupler
Pull-type description
Standard options
Spacings 20, 25, 30 in.
Option 1 Trip force
12,000 lbStandard type
Straight or parabolic with wear shin
Shear-bolt
Option 2 Trip force
5600 lbStandard type
Straight with wear shin or parabolic
Safety-trip
Option 3 Trip force
5300 lbStandard type
Straight with wear shin or parabolic
Cushion-trip
Option 4 Trip force
3200 - 5300 lbStandard type
Parabolic
Spring-reset rock standard
Ground-engaging components
Options 2.25-in.point, 2.25-in. chrome single or double carbide cap; 2-3/4-in. (70 mm), 5-in. (127 mm), 7-in. (178 mm) LaserRip points optional.or 10-in. (254 mm)
Coulters
Description
Type
Pounds of force
Blades
Closing wheel attachment
Description
Down force
Size
Spacing
Angle adjustments
Stabilizer/gauge wheels
Type
Wheels
Tires
Pull-type wheels
Description
Additional feature
Option 1
Option 2
Option 3
Option 4

Accessories and Attachments

Hitch

Bushing - A36380
Bushing, Shouldered - N181591
Hitch Pin, Category II - A17383
Mast Ball, Category II - N180506

Standards Attachments

Knife, Heavy-duty - BA23017