New 1520 Integral Drill

Planting & Seeding
REQUEST A QUOTE
REQUEST A QUOTE
Key Features
  • Productive seedbox capacities
  • Double-disk furrow openers
  • Reliable, durable convoluted seed tubes
  • Seed metering system

More Info

Features

Double-disk furrow openers
Double-disk openerDouble-disk opener
Double-disk openerDouble-disk opener

Double-disk openers create a furrow in which seed is placed. They work best in a prepared seedbed and leave the field relatively smooth, with minimal soil throw.

 

The double-disk openers are available with 150-, 190-, and 254-mm (6-, 7.5-, and 10-in.) row spacings. The 150-mm (6-in.) spaced drills have nominal residue flow in minimum till conditions. The 190-mm (7.5-in.) spacing is recommended for wet, sticky soil conditions such as the Red River Valley.

Cast-aluminum boots are standard equipment. Openers come with a zigzag pattern, with alternate short and long drawbars, to provide good trash flow in varied field conditions. The alternating of blades with a right/left leading-edge offset improves penetration.

 

Blades are offset with a 6-mm (1/4-in.) leading edge, and the pinch point is close to where the blades meet the soil for better penetration and residue cutting.

Productive seedbox capacities
SeedboxSeedbox

 

Seedboxes have a large capacity for longer intervals between stops for refilling. 

 

 

DRILL

TOTAL BOX CAPACITY

BU./ft

15-ft model

42 bushel

2.8 bu/ft

20-ft model

40 bushel

2.0 bu/ft

 

All boxes are plain grain with a large single lid for accessing the seedbox.

Specifications

Compare >>>

Select up to 2 models to compare specifications

John Deere1520 Integral Drill
Add Model
Add Model
Dimensions
Transport Width
15 ft
20 ft
Transport Height
6, 5 ft, in.
6, 5 ft, in.
Overall Length
6, 4 ft, in.
6, 4 ft, in.
Weight
3210 lb
4180 lb
Clearance
Capacities
Plain Grain
42 bu
40 bu
Grain/Fertilizer
Meters
Type
Fluted-feed
Fluted-feed
Opener Assembly
Number of Openers
30, 24, 18
40, 32, 24
Spacing
6, 7.5, 10 in.
6, 7.5, 10 in.
Down Pressure
Std. hand-crank, opt. active hydraulic
Std. hand-crank, opt. active
Disk
13.5 offset .25 in.
13.5 offset .25 in.
Gauge Wheels
2, 9.5Lx14, 8 PR
2, 9.5Lx14, 8 PR
Press Wheels
Std. 2x13-in.
Std. 2x13-in.
Closing Wheels
Monitor
Type
SeedStar or ComputerTrak 250, 350, 450
SeedStar or ComputerTrak 250, 350, 450

Accessories and Attachments

Miscellaneous

Grain agitator - 4.572 m (15 ft) - BA32568
Seed agitatorSeed agitator

A grain agitator is available to help move seed to the meters. Agitators are recommended for drilling trashy, inoculated, or very light or large seed. Required for drilling peas.

Grass seed attachment - 4.572-m (15-ft) drill 190.5-mm and 254-mm (7.5-in. and 10-in.) row spacing - BA32565
Grass seed attachmentGrass seed attachment

The grass seed attachment is used for accurate metering of grasses, forages, small grains and oil crops such as canola. This attachment is well suited for set-aside ground and waterways.

 

The grass seed attachment mounts to the rear of 1520 grain box and meters seed by fluted feed cups. The seed tube delivers the seed to the double disk opener placing the seed in the seed furrow.

Opener assembly with press wheel arm and handle - Left-hand, long - BA32023
Opener assembly with press wheel arm and handle - Left-hand, short - BA32022
Opener assembly with press wheel arm and handle - Right-hand, long - BA32021
Opener assembly with press wheel arm and handle - Right-hand, short - BA32020
Sensor Kit for ComputerTrak (4 Sensors) - BA31912
Track Eradicators (8 Standard - Less Shovels) - BA32567
Track eradicatorsTrack eradicators

Track eradicators include S-tine shanks (less sweeps).

 

S-tine shanks track eradicators with sweeps are available. These are used to lift tractor tire tracks from the seedbed. The track eradicators attach to the drill frame in front of the openers.

 

NOTE: Not compatible with coulter cart. May need to adjust at Quik-Coupler.